PLB Duct Pipe

PLB Duct Pipe

The Telecommunication ducts are HDPE duct pipes pre-lubricated with silicone cores suitable for telecommunication and fiber optic cables. They are derived by combining the strength and flexibility of PE material with a suitable lubricating layer on the inner surface of the ducts.

“SY-ARON” telecom ducts are suitable for cable installation by blowing technique or pulling by rope. Directional drilling can also be used to install electrical or telecommunication ducting in under-road applications, or heavily built-up areas. Our cable ducts offer extremely low friction properties, are strong & flexible, and highly suitable for fiber optic cable installations.

“SY-ARON” Smooth wall HDPE duct is made to Industry Standards for Power and Communications Applications. It can be installed using open trench methods, HDD (Horizontal Directional Drilled) Plowed, or pulled into conduit.

Features

Outstanding resistance to conventional chemical & environments
Flexible & highly durable
Can be tested with 1km blowing
Reduction of stress on cable during installation
Installation of longer length made feasible
Faster and easy installation of cable with less workers
Existing cables can be deploy after de-blowing from the duct
High capacity to Ultraviolet (UV) protection
Traceable
Duct can be supplied with pre-inserted rope or with Copper Tracer wire depending on customer requirements
Supplied in continuous length up to 1000 Meters
Extensive range of colours (08 Nos) for Individual duct identification

Applications

Railways Information Network
Cable Service Providers
Telecommunication
Computer Networking
Fiber Networking
Defense Network

Technical Specification

TEC / GR / FA / CDS – 008 / 04 / AUG – 19

PLB Duct Pipe Size Chart

Size 32mm / 26mm 40mm / 33mm 50mm / 42mm 63mm / 50mm 110mm / 80mm
Outside Diameter 32mm + 0.3mm – 0.0mm 40mm + 0.4mm – 0.0mm 50mm + 0.5mm – 0.0mm 63mm + 0.6mm – 0.0mm 110mm + 1.0mm – 0.0mm
Wall thickness 3.0mm ± 0.2mm 3.5mm ± 0.2mm 4.0mm ± 0.3mm 6.5mm ± 0.4mm 15.0mm ± 0.6mm
Thickness of the inner layer Minimum: 0.24mm Maximum: 0.36mm Minimum: 0.28mm Maximum: 0.42mm Minimum: 0.32mm Maximum: 0.48mm Minimum: 0.36mm Maximum: 0.54mm Maximum: 0.56mm Maximum: 0.84mm
Standard Length 1000 ± 100 Meters 1000 ± 100 Meters 1000 ± 100 Meters 500 ± 50 Meters 200 ± 20 Meters
Maximum Outer Diameter of Optical fiber cable that can be installed by blowing technique 12mm 16mm 21mm 25mm (144 Fiber) 40mm (576 Fiber)

Application

keyboard_arrow_up
Quick Inquiry
close slider